6
7
5
4
1
2
3
What your Package Contains
Things you will Need
Contents
Accessing Reset Pin and SD card slot
Accessing via Web Browser
4
8
9
Camera Variants
Installation
Network Configuration
Installing Mounting Template
Mounting the Camera on Wall/Ceiling
Adjusting the Camera Angle
Please read this guide first for correct installation and retain it for future reference. The information
in this guide is prevailing at the time of publication. However, Matrix Comsec reserves the right to
make changes in product design and specifications without prior notice.
Copyright
All rights reserved. No part of this document may be copied or reproduced in any form or by any
means without the prior written consent of Matrix Comsec.
Warranty
Limited Warranty. Valid only if primary protection is provided, mains supply is within limit and
protected, and environment conditions maintained within product specifications. Complete
warranty statement is available on our website:
www.matrixvideosurveillance.com
Technical Specification
IP66 Protection Accessory Installation
Know your Camera
5
5
5
Adjusting Focus and Zoom in Varifocal Cameras
1. Mounting Ring
2. Base Plate
3. Cable Assembly
4. Hole for Mounting
5. Base Plate grove for fitting
Mounting Ring
6. Camera Body
7. Lens Enclosure
The Standard variant consists of 2 connectors: Power Connector and
Ethernet Connector (POE).
The Premium variant consist of 6 connectors: Power Connector,
Ethernet Connector (POE), Audio IN, Audio OUT, Alarm IN and
Alarm OUT.
4
Know your Camera
Figure1
Mounting the Camera on False Ceiling
PAN, Tilt Movement
Powering the Camera
10
11
14
17
18
20
22
23
24
25
29
To Next Page
Loading...