Matrix SATATYA Project Series - What Your Package Contains; Things You will Need; Camera Variants

What your Package Contains
Things you will Need
Camera Variants
The Bullet Cameras are available in following variants:
1. Standard Variant used for General Surveillance in
Discipline/Safety Precaution.
2. Premium Variant used for Objective Surveillance in Entry/Exit
Monitoring, Periphery Monitoring, Productivity Monitoring, Unethical
Practices Monitoring.
Ÿ SATATYA Dome IP Camera Unit
Ÿ Wall Mounting Template
Ÿ Wall Mounting Screws with Screw Grip (3 nos.)
Ÿ Allen Key
Ÿ Cable Accessories to compliant for IP66
Ÿ Ceiling Support Plate
Ÿ Ceiling Support Plate Screws (M4x35 pan-PH)
• A Power Drill, Screwdriver Set, Pliers, Wire-cutter, Ladder.
• Necessary Cabling
• A Power Supply with the recommended output voltage of 12V DC.
Use an adapter to connect the camera to the power outlet.
5
You can capture near and broader view with lens of 2.8mm and
4.0 mm focal length. For example it can be used in ATM and
Elevators.
With lens of 6 mm focal length, far and narrow view can be
captured. For example it can be used in corridors or long
passage to capture long view.
6
The 5MP Camera variants are listed in below table,
Type of
Lens
Focal
Length
Fixed
4.0mm
6.0mm
CIDR50FL40CWS
Premium
Standard
CIDR50FL60CWS
Manual
Varifocal
2.8-12
mm
Motorized
Varifocal
NA
CIDR50MVL12CWP
CIDR50VL12CWS
2.8mm
CIDR50FL28CWS
2.8-12
mm
CIDR50FL28CWP
CIDR50FL40CWP
CIDR50FL60CWP
NA
Fixed
Fixed