Grove
Slit
Mounting ring
Grub screws
Base Plate
Figure 4
Figure 5
B. On False Ceiling (Recommended Method)
Figure 6
False Ceiling
Ceiling Support Plate
For installing Dome Camera on false ceiling follow the below
mentioned steps,
• Install the mounting template on the false ceiling.
• Drill the holes through the markings of the mounting template
on the false ceiling.
• By this you will get one 50mm diameter and three 7.5mm
diameter holes on the false ceiling.
• Insert the Ceiling Support Plate through the 50mm diameter
hole as shown in Figure 6.
• Place the Ceiling support plate over the false ceiling with keeping
the clinching nuts towards the holes on mounting template.
• Move Ceiling Support Plate manually as the holes on Ceiling
Support Plate align with the holes (7.5mm) on mounting template
as illustrated in Figure 7.
Figure 7
Clinching Nut
12
11
To Next Page
Loading...