9
CHAPTER 5: MANAGER MODE
5.1 USING MANAGER MODE
The Manager's Custom Mode allows the club owner to customize
the bike for the club.
1) To enter Manager Mode, press and hold down the UP and
DOWN LEVEL keys. Continue to hold down these two keys until the
display reads Manager and hit ENTER (Figure A).
2) To scroll through the list of options in Manager Mode, use the
UP and DOWN LEVEL keys. Each of the custom settings will show
on the display.
3) To select a custom setting, press the ENTER key when the
desired setting is shown.
4) To change the value of the setting, use the UP and DOWN
LEVEL keys.
5) To confirm and save the value of the setting, press the ENTER
key.
6) To exit the setting without saving, press the STOP key.
7) Press and hold the STOP key for 3-5 seconds to return to normal
operation.
5.2 MANAGER MODE OVERVIEW
FIGURE A
CUSTOM SETTING DEFAULT MINIMUM MAXIMUM DESCRIPTION
Maximum Time 60 min 5 min 99 min Sets the total run time of any program.
Default Time 30 min 5 min Maximum Time
Setting
Workout time when GO is pressed or when no time is selected
during program set up.
Default Age 30 10 100 Starting age when GO is pressed or when no age is selected
during program set up.
Default Weight 150 lbs /
68 kg
60 lbs /
30 kg
400 lbs /
182 kg
Weight used for program calorie expenditure calculations.
Accumulated Distance N/A 0 99,999 Miles
160,898 Km
Total distance for all programs.
Accumulated Time N/A 0 999,999 hours Total time for all programs displayed in hours.
Software N/A N/A N/A Current version of console software. Also able to check LCB
and radio versions if needed.
Sound Mode On On Off Turns the chime on / off when a button is pressed.
Out of Order Off On Off Locks the machine when out of order.
Gender Male Male Female Determines the gender of the user when not selected during
program set up.
Language English English English Sets the language for the console. Select between English,
Spanish, German, French, Italian, Portuguese, Finnish,
Japanese, Swedish, Dutch and Turkish.
Speed / Distance Mode Mile Mile Kilometer Displays distance in miles or kilometers.
Default Level 1 1 20 Starting resistance when GO is pressed or when no resistance
is selected during program set up.