Matrox 6150 Encoder - Supported Standards and Limitations; Supported Standards; Notes and Limitations

Matrox Maevex Series – User Guide 45
Supported standards
Notes and limitations
 Maevex 6150 encoder and 6100 encoder – 10-bit capture is supported only while using
source resolutions up to 1920
× 1200p60.
 While using a resolution of 3840 × 2160 at 60 Hz, capture and encoding are supported
only in 4:2:0.
 Certain limitations may occur when using scaling or multi-input composting. For more
information, contact Matrox technical support.
 Maevex 6150 encoder only – While using HDMI input or DisplayPort output
resolutions higher than 1920
× 1080, the frame rate of the DisplayPort console display (if
enabled) will be reduced to 30 fps or 15 fps to preserve computing power. The frame rate
of the DisplayPort console display won’t match the captured and encoded frame rate.
6150
encoder
6100
encoder
5150
encoder
5150
decoder
HDMI version 1.4b compatible 9999
DVI 1.0 compatible
(using HDMI to DVI-D adapter)
9999
EDID (Extended Display
Identification Data) 1.3 and VESA
E-EDID Standard Release A,
Revision 1
9999
USB 2.0 compatible 9 ———
USB 3.0 compatible 9 ———
VESA DisplayPort Standard, version
1.1
9 ———