28 Matrox Maevex Series – User Guide
Validating your Maevex setup
After connecting your Maevex devices, we recommend you validate your connection setup and
network discovery before you continue.
Description of LEDs
The LED on your Maevex device provides information to help you troubleshoot your Maevex
product. The following describes the LED on your Maevex device.
Maevex 6150 encoder
LED color 6150 encoder
No LED (black) Device isn’t powered.
Green (solid) Device is active.
Green (slow blink) Device is rebooting.
Green (fast blink) Configuration reset in process.
Amber (solid) Device is in maintenance mode.
Amber (slow blink) Device is restarting and is in maintenance mode.
Amber (fast blink) Device is updating the firmware.
Red (solid) Device has detected a fatal error. Try rebooting your device. If,
after restarting your device, the LED is still red, contact your
vendor for technical support (see “Customer support”, page
53).
To Next Page
Loading...
