Matrox 6150 Encoder - Installation Overview; Installing Maevex 6100 Encoder; Connecting Maevex Products; Validating Maevex Setup

Matrox Maevex Series – User Guide 9
Installation overview
To install your Matrox product:
1 Install your Maevex 6100 encoder – see “Installing and connecting your Maevex 6100
encoder”, page 18.
2 Connect your product –
 Maevex 6150 Encoder – see “Connecting your Maevex 6150 encoder”, page 12.
 Maevex 6100 Encoder – see “Connecting your Maevex 6100 encoder”, page 20.
 Maevex 5150 Encoder – see “Connecting your Maevex 5150 encoder”, page 25.
 Maevex 5150 Decoder – see “Connecting your Maevex 5150 decoder”, page 21.
3 Validate your setup – see “Validating your Maevex setup”, page 28.
4 Install the software – see “Installing Matrox PowerStream Plus software”, page 34. For
more information on PowerStream Plus software, see the Matrox PowerStream Plus User
Guide.
More information
Your Matrox user guide provides information on installing and connecting your Matrox hardware.
For information on other Matrox software features and options, see the documentation for that
software.
For information on how to use and configure PowerStream Plus software, see the Matrox
PowerStream Plus User Guide.
Be sure to check for any last-minute release notes included with your product. Also, check the Matrox
web site (www.matrox.com/graphics
) for the latest Matrox software, technical support, and product
information.