Maverick MK2 Spot - DMX Modes and Control; 32 CH Control Functions; 24 CH DMX Channel Map

Operation
-20- Maverick MK2 Spot User Manual Rev. 4
ZOOM
1. Use <UP> or <DOWN> to select ZOOM.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
PRISM
1. Use <UP> or <DOWN> to select PRISM.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
IRIS
1. Use <UP> or <DOWN> to select IRIS.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
FROST
1. Use <UP> or <DOWN> to select FROST.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
CYAN
1. Use <UP> or <DOWN> to select CYAN.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
MAGENTA
1. Use <UP> or <DOWN> to select MAGENTA.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
YELLOW
1. Use <UP> or <DOWN> to select YELLOW.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
CTO
1. Use <UP> or <DOWN> to select CTO.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
DIMMER
1. Use <UP> or <DOWN> to select DIMMER.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
LED POWER
1. Use <UP> or <DOWN> to select LED POWER.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
MAC4
1. Use <UP> or <DOWN> to select MAC4.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
MAC5
1. Use <UP> or <DOWN> to select MAC5.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
MAC6
1. Use <UP> or <DOWN> to select MAC6.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.