Maverick MK2 Spot - DMX Functions - 32 Channel Mode

Operation
Maverick MK2 Spot User Manual Rev. 4 -19-
Offset Mode
The Offset mode provides fine adjustments for the home position of all the moving parts in the
optical path as
well as the pan and tilt movements. This way, when in their home position, the
moving parts do not show any border or reduce the light output.
1. Starting from the Main Level screen, press and hold <MENU> until the passcode screen
appears.
2. Enter the passcode 2323 using one of the following methods:
• Through the touchscreen: use the number pad on the screen to enter 2323.
• With the buttons:
Use <DOWN> to select the number to be changed. d.
Use <UP> to increase the value. e.
Repeat until 2323 has been entered. f.
3. Press <ENTER>.
This brings you into the Zero Adjust menu screen.
PAN
1. Use <UP> or <DOWN> to select PAN.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
TILT
1. Use <UP> or <DOWN> to select TILT.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
COLOR
1. Use <UP> or <DOWN> to select COLOR.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
GOBO
1. Use <UP> or <DOWN> to select GOBO.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
GOBO ROTATE
1. Use <UP> or <DOWN> to select GOBO ROTATE.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
GOBO 2
1. Use <UP> or <DOWN> to select GOBO 2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
GOBO 2 ROTATE
1. Use <UP> or <DOWN> to select GOBO 2 ROTATE.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
FOCUS 1
1. Use <UP> or <DOWN> to select FOCUS 1.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
FOCUS 2
1. Use <UP> or <DOWN> to select FOCUS 2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.
FOCUS GOBO 2
1. Use <UP> or <DOWN> to select FOCUS GOBO 2.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to increase or decrease the starting value, from 000–255.
4. Press <ENTER>.