Max ER-1600 - Setting Line Shift Time, In;Out and Daylight Saving Time (Mode 3)

- 15 -
SETTING LINE SHIFT TIME, IN/OUT AND DAYLIGHT SA
V-
ING TIME (MODE 3)
Procedure
1. Press the CANCEL key for 3sec. or more. The symbol appears on the display to in-
dicate the setting mode is on. If password has been set up, enter the password before into
the setting mode. (See [6 ] on page 13)
2. Press the IN2 key. The symbol appears at MODE 3 on the display.
3. Press the or key to change each item.
4. Press the SET key after changing each item. The display moves to next item in the
order of Line Shift Time, IN/OUT, Overtime Start Time (OST) and Daylight Saving Time.
When the SET key is pressed at the end, the buzzer beeps twice and the display re-
turns to the start of the setting mode.
If C-05 is displayed, press the SET key. (See [14] on page 22)
1. The time is displayed in only 24-hour format.
2. Initial data is displayed by pressing the Clear key.
[Line Shift Time]
[IN1]
[OUT1]
[IN2]
[OUT2]
Items (MODE 3)
Initial data
Contents of setting
Code No.
LST 3 : 00 Line Shift Time (Day change time) 01
IN 1
- - : - -
Working start time (IN 1) 02
OUT 1 - - : - - Working end time (OUT 1) 03
IN 2
- - : - -
Working start time (IN 2) 04
OUT 2
- - : - -
Working end time (OUT 2) 05
OST
- - : - -
Starting time of Overtime Work 06
Daylight Saving Time Start
- - : - -
Starting date of Daylight Saving Time 07
Daylight Saving Time End
- - : - -
Ending date of Daylight Saving Time 08
- 16 -
Procedure
1. Setting IN & OUT and starting time of Overtime Work
[Example] Line Shift Time (Day change time) : 4 : 00
Starting time of work : 9 : 00
Starting time of lunch : 12 : 00
Ending time of lunch : 13 : 00
Ending time of work : 17 : 00
Starting time of Overtime work : 17 : 30
Procedure [MODE 3] Display
Press the IN2 key.
Current Line Shift Time is shown on the display.
Press the or key until the display shows 4:00.
Press the SET key to register the Line Shift Time.
Press the or key until the display shows 9.
Press the SET key to register the Hour for IN1.
Press the or key until the display shows 00.
Press the SET key to register the Minute for IN1.
Press the or key until the display shows 12.
Press the SET key to register the Hour for OUT1.
Press the or key until the display shows 00.
Press the SET key to register the Minute for OUT1.
Press the or key until the display shows 13.
Press the SET key to register the Hour for IN2.
Press the or key until the display shows 00.
Press the SET key to register the Minute for IN2.
Press the or key until the display shows 17.
Press the SET key to register the Hour for OUT2.
Press the or key until the display shows 00.
Press the SET key to register the Minute for OUT2.
Press the or key until the display shows 17.
Press the SET key to register the Hour for OST.
Press the or key until the display shows 30.
Press the SET key to register the Minute for OST.