OPERATION 4 - 1
SE-44R / SE-44
Ultrasonic Sensor
www.maxcess.eu MI 1026 1 A
Betrieb.fm
4 OPERATION
WARNING:
Danger of injury by crushing
Ö Do not place your hands on or near moving parts (rollers,
material web, etc.) during operation.
WARNING:
Danger of injury due to cutting on the edge of the material web
Ö Do not place your hands on the edge of the (moving) material
web during operation.
CAUTION:
Depending on the material of the web that is being guided, it is
possible that the web edge could grind against the inside of the
sensor fork, resulting in notches and incisions on the sensor.
The sensor could become unusable.
Settings All settings required for operating the SE-44 sensor are
performed with the web guide controller. Information on this
topic is available in the Operating Instructions for the web guide
controller.
Before the SE-44 is used for working with acoustically
transparent material, the sensor must always be calibrated to
the contrast with the web guide controller.
To Next Page
Loading...
Need help?
General
