MAXDATA PLATINUM 300 IR - Clearing the CMOS

20 21MAXDATA PLATINUM 300 IR M8Server Utilities
20 21MAXDATA PLATINUM 300 IR M8Server Utilities
Clearing the CMOS
If you are not able to access the BIOS setup screens, the CMOS Clear jumper will need to be used
to reset the configuration RAM.
1. Power down the system and disconnect the AC power.
2. Open the server.
3. Move the jumper from the normal operation position, at pins 1 and 2, to the CMOS Clear
position, covering pins 2 and 3.
4. Wait 5 to 10 seconds.
5. Return the CMOS Clear jumper to the Normal location, covering pins 1 and 2.
6. Close the server chassis.
7. Reconnect the AC power and power up the system.