Solution
Problem
The video and audio
is not shown in the
meeting platform
The videobar is not
turned off after meeting
The LED light flash
during the meeting
Why the image is fliped?
How can I fix it?
Possible Cause
The video and audio of
Videobar is not the
default output source.
PIR sensor
DOA indicator
Reverse mount
Select camera, Microphone
and Speaker of the videobar
as your main stream in the
video meeting platfrom
PIR sensor will detect the
people in the meeting room
and turn on automatically
The Videobar has a DOA
indicator features and will
point to the direction of the
voice source by blue light.
After indicating the direction,
it will turn back to white color
Set the flip vertically and
horizontally in the MAXHUB Align
14
13. Common Faults and Troubleshooting
The following table contains common faults and their solutions.
Notes:
•Make sure the product is connected to power and is turned on.
•Make sure the USB cable is connected firmly on the product and your
computer.
•Check if your product is running on the latest firmware.
To Next Page
Loading...
