To Next PageTo Next PageWhat to do if my MaxJax M7K lift does not go up or down?
If your MaxJax Lifting Systems lift isn't moving, ensure there's enough hydraulic fluid in the reservoir. Check that the power unit is properly connected to a power source. Also, verify there's no air in the hydraulic system and that none of the hydraulic hoses are pinched or leaking. If the hydraulic fluid is dirty, replace it with clean fluid.
Why is my MaxJax M7K motor not running?
If the motor isn't running, check the connection to the power source to ensure it's plugged in and has the correct voltage. You may also need to check the wiring diagram to ensure everything is properly connected.
What to do if vehicle on MaxJax Lifting Systems lift is not level?
If the vehicle on the lift isn't level, ensure the lift is engaged on the safety locks at the same height on both sides and that the safety locks in both posts are engaged. If the lift is not on a safety lock, carefully lower the vehicle to the ground and raise it again.
Why does my MaxJax M7K Lifting Systems lift make odd noises when in use?
Odd noises during use may indicate that the slide blocks and hinge points need lubrication. Apply white lithium grease to these areas to resolve the issue.
What to do if MaxJax M7K Lifting Systems lift does not stay up?
If the lift isn't staying up, make sure it is engaged on its safety locks. Also, check for any hydraulic fluid leaks.
General| Brand | MaxJax |
|---|---|
| Model | M7K |
| Category | Lifting Systems |
| Language | English |
Guidance on inspecting the equipment upon delivery and handling discrepancies.
Information regarding potential chemical exposure and its health implications.
Provides essential safety rules and pre-operation checks for safe lift usage.
Highlights critical safety precautions and information regarding the lift's hydraulic system.
Offers further guidance on proper lift usage, including surface, clearance, and anchoring.
Explains how to correctly use lift pads and adapters for balanced vehicle lifting.
Detailed step-by-step guide on how to safely lift a vehicle using the MaxJax.
Step-by-step instructions for safely lowering a vehicle from the lift.
Specific procedure for lowering vehicles with the CE Safety Release Kit.
Instructions on how to safely relocate the portable MaxJax lift.
Guidance on how to properly re-install the MaxJax lift after storage or relocation.
Covers daily checks and cleaning tasks to ensure the lift's proper function and safety.
Details weekly inspections and checks for controls and labels.
Outlines monthly lubrication and fluid level checks for the lift.
