Maxon BMR-55 - Page 27

27
2. Open cart stops by pushing the
cart stop lock down with your
foot (FIG. 27-1B). (FIGS. 27-1A
and 27-1B). Next, position
cart(s) and stand in the footprint
area as shown in FIG. 27-1A.
NOTE: Cart stops are kept open by a cart stop lock.
UNLOADING PLATFORM AT BED LEVEL
(DUAL CART STOPS OPEN)
FIG. 27-2
3. Raise the platform to bed
level (FIG. 27-2). Move the
load off the platform into the
vehicle body (FIG. 27-2).
CART STOPS
OPENING CART STOPS
(RH SIDE OF FLIP OVER)
FIG. 27-1B
VEHICLE
BODY
PLATFORM
LOADING PLATFORM AT GROUND LEVEL
(CART STOPS OPEN)
FIG. 27-1A
CART STOP LOCK
(DUAL CART
STOPS ONLY)
CART STOP
LOCK