6 - General Safety Instructions
1. Mirror Reflection
The output port of the handheld laser welder may generate a secondary laser
beam that radiates outwards at various angles. This occurrence, where the main
beam of the handheld laser welding machine produces a diverging beam upon
reflecting off a flat surface, is referred to as specular reflection. Although the
energy of the secondary laser beam is significantly lower than that of the primary
laser beam, its intensity can still cause harm to human eyes, skin, or certain
material surfaces. Exercise caution while welding highly reflective materials, and
ensure there is no one in the line of reflection and no flammable materials present
during the welding process.
WARNING :
◎Laser radiation from this device is invisible, so take extreme caution to avoid or
minimize any reflections.
2. Safety Instructions for Accessories
Laser exposure can damage the photosensitive elements within the optical
accessories of the handheld laser welding machine, so pay close attention to device
protection.
WARNING :
◎The output laser intensity of Maxphotonics handheld laser welding machine can
weld metal, burn skin, clothing, and paint, and ignite volatile substances like
alcohol, gasoline, and ether. During operation and use, make sure to isolate
flammable items around the handheld laser welding machine.
3. Optical Handling Precautions
Before operating the handheld laser welding machine, Maxphotonics strongly
recommends you follow these guidelines:
(1) Do not look directly into the light-emitting hole of the handheld laser welding
machine;
(2) Keep the handheld laser welding machine and related optical output devices
below eye level;
To Next Page
Loading...
Need help?
General
