MAXPhotonics MA1 Series User Manual

Note: When using the pulse mode for the wire feeder, set the laser light output
to continuous mode.
1. Inspecting Product Accessories
15-Product Accessory Inspection and Cleaning Guide
:
To clean the tip protection mirror window, gather the following equipment:
(1) Powder-free rubber gloves or finger cots
(2) Lint-free fiber cleaning cloth and cotton swab
(3) Optical grade alcohol (purity >99.5%)
(4) Light source (flashlight or mobile phone indicator)
(5) Masking tape
(6) Microscope
67

MAXPhotonics MA1 Series Specifications

General

Brand	MAXPhotonics
Model	MA1 Series
Category	Welding System
Language	English