Mayer MMD013C - Page 20

19
Warning - Risk of injury
1.
2.
Removing the appliance door
1.
2.
3.
4.
Fitting the appliance door
Reattach the appliance door in the opposite sequence to removal.
1.
2.
3.
If the hinges are not locked, they can snap shut with great force. Ensure that the
locking levers are always fully closed or, when detaching the appliance door, fully open.
The hinges on the appliance door move when opening and closing the door, and you
may be trapped. Keep your hands away from the hinges.
Open the appliance door fully.
Fold open the two locking levers on the left and right
Close the appliance door as far as the limit stop.
With both hands, grip the door on the left- and right-hand side, and pull it out upwards.
When attaching the appliance door, ensure that both hinges are placed right onto
the installing holes of the front panel of the cavity.
Ensure that the hinges are inserted into the correct position. You must be able to
insert them easily and without resistance. If you can feel any resistance, check that
the hinges are inserted into the holes right.
Open the appliance door fully. While opening the appliance door , you can make
another check if the hinges are onto the right position . If you make the tting
wrong , you will not be able to make the appliance door fully opened.
Fold both locking levers closed again.
Close the cooking compartment door. By the same time , we warmly recommend
you to check one more time , if the door is onto the right position and if the
ventilation slots are not half-sealed .