22
If a fault occurs, before calling the after-sales service, please ensure that is not because
of incorrect operations and refer to the fault table, attempt to correct the fault yourself.
You can often easily rectify technical faults on the appliance yourself.
If a dish does not turn out exactly as you wanted, you can nd many tips and instructions for
preparation at the end of the operating manual..
The appliance does not
work.
Check the circuit breaker in
the fuse box.
Problem Cause of Issue Solution
Faulty fuse.
Check whether the kitchen
light or other kitchen
appliances are working.
Power cut.
Knobs have fallen out of the
support in the control
panel.
Knobs have been
accidentally disengaged.
Knobs can be removed.
Simply place knobs back in
their support in the
control panel and push them
in so that they engage
and can be turned as usual.
Knobs can no longer be
turned easily.
There is dirt under knobs.
Knobs can be removed.
To disengage knobs, simply
remove them from the
support.
Alternatively, press on the
outer edge of knobs so
that they tip and can be
picked up easily.
Carefully clean the knobs
using a cloth and soapy
water.
Dry with a soft cloth.
Do not use any sharp or
abrasive materials.
Do not soak or clean in the
dishwasher.
Do not remove knobs too
often so that the support
remains stable.
TROUBLESHOOTING
To Next Page
Loading...
