Mayer MMD013C - Appliance Door

18
Notes
1.
2.
3.
4.
Tips
1.
2.
3.
4.
Slight dierences in colour on the front of the appliance are caused by the use of dierent
materials, such as glass, plastic and metal.
Shadows on the door panels, which look like streaks, are caused by reections made
by the interior lighting.
Enamel is baked on at very high temperatures. This can cause some slight colour variation.
This is normal and does not aect operation. The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough. This does not impair the anti-corrosion
protection.
Always keep the appliance clean and remove dirt immediately so that stubborn
deposits of dirt do not build up.
Clean the cooking compartment after each use. This will ensure that dirt cannot be baked
on.
Always remove ecks of lime scale, grease, starch and albumin (e.g. egg white) immediately.
Remove ecks of food with sugar content immediately, if possible, when the eck is still
warm.
Use suitable ovenware for roasting, e.g. a roasting dish.
APPLIANCE DOOR
With good care and cleaning, your appliance will retain its appearance and remain fully
functional for a long time to come. This will tell you how to remove the appliance door and
clean it.
For cleaning purposes and to remove the door panels, you can detach the appliance door.
The appliance door hinges each have a locking lever.
When the locking levers are closed, the appliance door is secured in place. It cannot be
detached.
When the locking levers are open in order to detach the appliance door, the hinges are
locked. They cannot snap shut.