24
Warning
Maximum operating time
Replacing the lamp on the corner of the cavity
Warning
Risk of electric shock
When replacing the lamp, the lamp socket contact are live. Before replacing the lamp, unplug
the appliance from the mains or switch o the circuit breaker in the fuse box.
Risk of burns
The appliance becomes very hot. Never touch the interior surfaces of the appliance or
the heating elements. Always allow the appliance to cool down. Keep children at a safe
distance.
1.
2.
3.
4.
5.
Insert the new lamp, making sure that the pins are in the correct position. Push the lamp
in rmly.
Incorrect repairs are dangerous. Repairs may only be carried out and damaged power
cables replaced by one of our trained after-sales technicians. If the appliance is defective,
unplug the appliance from the mains or switch o the circuit breaker in the fuse box.
Contact the after-sales service.
The maximum operating time of this appliance is 9 hours, to prevent that you forget shot
o the power.
If the cavity lamp fails, it must be replaced. Heat-resistant, 25 watt, 230 V halogen lamps
are available from the after-sales service or specialist retailers.
When handling the halogen lamp, use a dry cloth. This will increase the service life of the
lamp.
Place a towel in the cold cavity to prevent damage.
Turn the glass cover anti-clockwise to remove it.
Pull out the lamp – do not turn it.
Screw the glass cover back in.
Remove the towel and switch on the circuit breaker to see if lamp switches on.
To Next Page
Loading...
