EasyManua.ls Logo

Maytag 27" User Manual

Maytag 27"
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Maytag Neptune
27” Front Load Washer
Troubleshooting Guide
© Maytag Technical Training Services 2005
L2005-005
Question and Answer IconNeed help?

Do you have a question about the Maytag 27" and is the answer not in the manual?

Maytag 27" Specifications

General IconGeneral
TypeTop Load
Spin Speed700 RPM
Energy Star CertifiedYes
ColorWhite
Width27 in
Depth27 in
Cycle OptionsBulky Items, Delicates, Heavy Duty, Normal, Quick Wash, Rinse & Spin

Summary

Washer Troubleshooting

Will Not Start

Diagnoses issues preventing the washer from starting.

Leaking

Checks for leaks from hoses, seals, and connections.

No Tumble

Diagnoses why the washer does not tumble clothes.

Will Not Spin

Diagnoses issues with the washer failing to spin.

Tub Full of Suds

Addresses causes and solutions for excessive suds.

Wet Clothes

Explains reasons for clothes remaining too wet.

Will Not Drain

Troubleshoots water not draining from the washer.

Noisy and/or Vibration/Walking

Addresses washer stability and noise complaints.

Rubber Feet Leaving Marks on Floor

Tips to prevent floor marks from washer feet.

Additive Cups Full of Water

Explains normal water in dispenser cups and cleaning.

Buttons do not Respond

Troubleshoots unresponsive control panel buttons.

Consumer Information Codes

Explains displayed error codes and their meanings.

Service Mode Diagnostics

Enter / Exit Service Mode

Guides on accessing and leaving the service diagnostic mode.

Quick Spin Test

Procedure to test the washer's spin cycle functionality.

Hold Quick Spin Step

Method to pause the spin test at a specific speed.

Fast Time Down Test

Technique to advance cycle stages during testing.

Quick Service Cycle

A comprehensive diagnostic check of all washer systems.

LED/Switch Test

Procedure to test control panel LEDs and input switches.

Board Input Test

Verifies signal inputs received by the control board.

Board Output Test

Tests the functionality of outputs controlled by the main board.

Display Diagnostic Codes

Instructions for viewing error codes on the washer's display.

Component Testing Procedures

Fill Valve Resistance Checks

Measures resistance of hot, pre, bleach, and main fill valves.

Door Switch Coil Checks

Measures resistance of the door lock switch coils.

Thermistor Resistance Check

Measures resistance of the temperature thermistor.

Motor Resistance Checks

Measures resistance of the main motor windings.

Related product manuals