Robotic Pool Cleaner BASIC 2 | Operating Instructions
9
To remove the
kinks, stretch
the cable out
completely and let
it sit for at least a
day in the sun.
If the pool cleaner will not be in use for an extended
period, perform the following storage steps:
•Make sure that no water is left in the pool cleaner.
•Thoroughly clean the filter bag or cartridge and insert in
place.
•Roll up the cable so that it has no kinks.
•Store the pool cleaner upright on the Stand in
a protected area out of direct sun/rain/frost at a
temperature of between 5˚-45˚C / 41˚-113˚F.
5.5. Off-season storage
Cable
To Previous Page
Loading...
