To Next PageTo Next Page
Need help?Do you have a question about the Maytronics Dolphin Liberty 400 and is the answer not in the manual?
General| Brand | Maytronics |
|---|---|
| Model | Dolphin Liberty 400 |
| Category | Swimming Pool Cleaners |
| Language | English |
Connect the robot's charger to the wall outlet.
Attach the inductive charger to the robotic pool cleaner.
Peel off the sticker and charge the battery to 100%.
Unplug the charger and press the power button to start.
Place the robot in the pool; it will begin cleaning within 30 seconds.
Customize cleaning modes, such as 'Floor only'.
Easily retrieve the robot from the pool by shaking the Clicker.
Energy-saving mode for pool floor cleaning up to 30 min, thrice weekly.
Alerts for operation outside the 6°C-35°C range.
Removes grime and oils from the pool's waterline.
Configure and control the robot via a mobile application.
Refer to the User Manual for error notifications.
Use a grab hook to pull the robot to the waterline and out.
Robot climbs wall and waits for retrieval after cleaning cycle.
Quick-rinse the filter immediately after removing the robot from the pool.
Charge in a shaded area (6°C-35°C) until 3 green bars appear.
Store with ~50% battery charge at -10°C to 40°C.
Safety precautions, operating ranges, and technical specifications.
