Dolphin principals of operation
Dolphin principals of operation
Driving & steering
Dolphin robots drive on two brushes that are connected by sturdy tracks and
a robust robotic drive system to the motor unit which provides the motion and
steering power to the Robot. The drive and steering system ensures optimal
maneuverability in any pool condition, including around common obstacles.
Scanning system
The Dolphin scanning system is powered by intelligent software that detects
processes and learns the various parameters of the pool, throughout the cleaning
cycle, this enables optimal coverage without stalling near the walls and without
wasting cleaning time. The software allows sharp changes in direction, ensuring the
Dolphin reaches into every area and corner of the pool.
• Floor-only models
The robot is designed to work 100% of the cycle time on thoroughly cleaning the
entire floor area. This includes the critical areas where the floor and walls meet,
where dirt tends to accumulate.
• Climbing models
The robot is designed to optimally distribute cleaning time between the pool
floor, walls and waterline, so that each part is worked on for the maximum time
required for complete and thorough cleaning.
To Next Page
Loading...
