Robotic Pool Cleaner MCC6/MTC6 | User Instructions
11
Place the impeller cover at an angle
so that the notch is on the second
ring of the spring.
Press down on the impeller cover in
the direction of the spring, pushing
it into place.
Replace the screws.
7. OFFSEASON STORAGE
If the Pool Cleaner will not be in use for an extended period, perform the following storage steps:
• Make sure that no water is left in the Pool Cleaner
• Thoroughly clean the filter bag or cartridges and insert in place
• Roll up the cable so that it has no kinks and place on the Caddy
• Store the Pool Cleaner in a protected area either on its Caddy or simply upsidedown
-Book_8151255_MCC6-MTC6.indb 11 15/2/2012 10:48 AM
To Next Page
Loading...
