S15M(X)-D Manual Transmission Transmission
Reverse Gear Lockout Mechanism
• To prevent accidental shifting into reverse gear while downshifting from the 5
th
to the 4
th
gear a cam-type lockout mechanism is installed in the extension housing (2WD) or in the
transfer case (4WD). The figure below shows the variant of the 4WD version.
BT-50_05012
A Shifting directly from 5
th
to reverse gear
(locked)
2 Selector in 5
th
gear position
B Shifting from 5
th
to reverse gear via neutral
(released)
3 Lockout mechanism released
1 Selector locked 4 Selector in Neutral position
05-14 Service Training BT-50
To Next Page
Loading...
