Mazda B-Series - Front and Rear Bumper

Exterior Trim Body & Accessories
Front and Rear Bumper
• The front bumper is completely new designed, while the rear bumper is the same as
used on the B-Series.
• The plastic front bumper is installed on a steel reinforcement. The bumper also
accommodates the front grille, newly designed front fog lights and the lower wheel arch
extensions (if equipped).
BT-50_09005
1 Bumper reinforcement 4 Front bumper
2 Lower wheel arch extension 5 Front hole cover (without front fog lights)
3 Front hole cover (with front fog lights)
09-8 Service Training BT-50