Mazda B-Series - Simulation Test

WL-C Engine Control System
PID Definition Unit/Condition
g/s
V
Pa
V
MIL Malfunction indicator lamp OFF/ON
MIL_DIS Distance travelled since the MIL was activated km
RPM Engine speed rpm
SEGRP DSD Desired EGR valve position %
SELTESTDTC Diagnostic trouble codes —
VBCV VBC solenoid valve %
VPWR Module supply voltage V
VSS Vehicle speed km/h
WARMSW Warm-up switch OFF/ON
WARMSOL Exhaust solenoid valve shutter valve OFF/ON
BT-50_T01010b
MAP Manifold absolute pressure
Mass airflowMAF
Simulation Test
• The simulation test function allows activating certain PIDs of the PCM. Therefore
connect the M-MDS to the vehicle and select the option ToolboxÆDataloggerÆ
ModulesÆPCM.
KOEO KOER
ACCS # A/C relay OFF/ON × x
EGRV2 # EGR control solenoid valve OFF/ON × x
GP_LMP # Glow indicator light OFF/ON × x
GPC # Glow plug relay OFF/ON × x
IASV # ISV solenoid valve (half) OFF/ON × x
IASV2 # ISV solenoid valve (full) OFF/ON × x
INJ_1 # Fuel injector no.1 OFF — ×
INJ_2 # Fuel injector no.2 OFF — ×
INJ_3 # Fuel injector no.3 OFF — ×
INJ_4 # Fuel injector no.4 OFF — ×
SEGRP # EGR solenoid valve % — x
VBCV #
VBC solenoid valve
%—
BT-50_T01011
×: Applicable
—: Not applicable
PID Applicable component Unit/Condition
Test condition
x
Service Training BT-50 01-53