Airbag System Restraints
SAS Control Module
• The SAS control module is located on the centre tunnel, in front of the shift lever.
• The SAS control module processes the signals it receives from the internal micro-
mechanical sensor and the side airbag sensors. If the acceleration/deceleration caused
by a frontal or side impact exceeds a predetermined threshold, the SAS control module
triggers the airbags / pre-tensioners or only the side airbags with a DC signal.
BT-50_08003
1 SAS control module 3 Connector
2 Driving direction
08-4 Service Training BT-50
To Next Page
Loading...
