Mazda B-Series - PID Monitor

Control System WL-C Engine
PID Monitor
• The PID monitor function allows monitoring the PIDs of the PCM. Therefore connect the
M-MDS to the vehicle and select the option ToolboxÆDataloggerÆModulesÆPCM.
PID Definition Unit/Condition
A
AT
Ambient air temperature °C
AC_REQ A/C request signal
OFF/ON
A
CCS
A
/C relay
OFF/ON
APP Accelerator pedal position %
%
V
%
V
ARPMDES Target engine speed rpm
Pa
V
BOO Brake switch OFF/ON
CPP Clutch pedal position switch OFF/ON
DTCCNT DTC count —
°C
V
EGRV2 EGR control solenoid valve OFF/ON
A
%
FIP_SCV Fuel metering valve A
FLT Fuel temperature °C
FRP Fuel rail pressure Pa
GP_LMP Glow indicator light OFF/ON
GPC Glow plug relay OFF/ON
IASV ISV solenoid valve (half) OFF/ON
IASV2 ISV solenoid valve (full) OFF/ON
°C
V
INGEAR Load / no load condition OFF/ON
IVS Idle switch OFF Idle / Idle
LOAD Engine load %
BT-50_T01010a
High-pressure pump flow controlFIP_FL
IAT Intake air temperature (IAT sensor no.1)
BARO Barometric pressure
ECT Engine coolant temperature
Accelerator pedal position sensor no.1APP1
APP2 Accelerator pedal position sensor no.2
01-52 Service Training BT-50