Control System WL-C Engine
Control System
Features
• The control system of the WL-C engine has the following new features:
– CKP (CranKshaft Position) sensor located at the flywheel
– CMP (CaMshaft Position) sensor
– PCM (Powertrain Control Module) with extended control strategies
Specifications
Specification
WL-C
IAT sensor No.2 (built into MAF sensor) Thermistor
MAF sensor Hot-wire
IAT sensor No.1(built into MAP sensor) Thermistor
MAP sensor Piezoelectric element
ECT sensor Thermistor
CMP sensor Hall element type
CKP sensor Inductive type
APP sensor Potentiometer
EGR valve position sensor Potentiometer
BARO sensor (built into PCM) Piezoelectric element
Fuel temperature sensor Thermistor
Fuel pressure sensor Piezoelectric element
Neutral switch ON/OFF
CPP switch ON/OFF
Idle switch ON/OFF
BT-50_T01006
Item
01-40 Service Training BT-50
To Next Page
Loading...
