qi-stop Warning Light, Beep
If a system malfunction o ccurs or system operation precautions are necessary, the driver is
notified by the warning beep and warning light in the instrument cluster.
Warning light/beep Verification
The warning beep sounds, and the i-stop warning light
(amber) and other warning lights illuminate while the
i-stop function is operating.
(Manual transaxle)
With the shift lever in a position other than neutral, the
driver's seat belt is unfastened and the driver's door is
opened.
(Automatic transaxle)
With the selector lever in the D or M
(not in second gear fixed mode) position, the driver's
seat belt is unfastened and the driver's door is opened.
If this is the case, the engine will not automatically
restart for safety reasons. Start the engine using the
normal method.
The i-stop warning light (amber) flashes.
The i-stop system may have some kind of malfunction.
Have your vehicle inspected by an expert repairer, we
recommend an Authorised Mazda Repairer as soon as
possible.
The i-stop indicator light (green) flashes twice per
second while the i-stop function is operating.
(Manual transaxle)
Check whether the shift lever is in the neutral position.
(European model)
The warning beep sounds, and the i-stop indicator light
(green) flashes twice per second while the i-stop
function is operating.
Check whether the driver's door is closed.
(Except European model)
The warning beep sounds and the i-stop indicator light
(green) illuminates while i-stop is operating.
4-20
When Driving
Start/Stop Engine
To Next Page
Loading...
