NOTE
l
When the ignition is switched OFF,
the seat position memory function is
operable while the selector lever is in
a position other than P position
(Automatic trans axle) or the parking
brake is not applied (Manual
transaxle), however, if the ignition is
switched ON while the seat position
memory function is operating, the
operation is stopped.
l
The seat position adjustment is
cancelled in the following cases:
l
Any of the seat adjustment
switches is operated.
l
The SET button is pressed.
l
Programming butt on 1 or 2 is
pressed.
l
The key switch or switch is
operated.
l
The vehicle starts moving.
Erasing programmed seat positions
(Erasing the seat positions programmed
to the key)
1. Switch the ignition OFF.
2. Continue pressing the seat SET button
until a beep sound is heard.
3. After the beep sounds, press the key
switch continuously within 5 seconds
until the beep sounds.
Rear Seat
qSplit Folding
The seatbacks can be folded down to
provide more space in the luggage
compartment.
WARNING
Tightly secure cargo in the luggage
compartment when it is trans ported
with the seatbacks folded down:
Driving without tightly securing cargo
and luggage is dangerous as it could
move and become an obstruction to
driving during emergency braking or
a collision resulting in an unexpected
accident.
Always remove the child-restraint
system from the rear seat before
operating the remote handle levers for
the rear seat:
Operating the remote han dle levers
while a rear-facing child -restraint
system is in the rear seat is dangerous.
It could cause injury to a child seated
in the child-restraint system when the
seatback suddenly flips forward.
2-10
Essential Safety Equipment
Seats
To Next Page
Loading...
