Hazard Warning Flasher
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Depress the hazard warning flasher switch
and all the direction indicators will flash.
The hazard warning indicator lights in the
instrument cluster flash simultaneously.
NOTE
l
The direction indicators do not work
when the hazard warning ligh ts are
on.
l
Check local regulations about the use
of hazard warning lights while the
vehicle is being towed to verify that
it is not in violation of the law.
l
If the brake pedal is depressed while
driving on slippery roads, the
emergency stop signal system could
operate causing all the turn and lane
change signals to flash. Ref er to
Emergency Stop Signal System on
page 4-104.
l
While the emergency stop signal
system is operating, all the direction
indicators automatically flash rapidly
to caution the driver of a vehicle
following behind your vehicle of a
sudden braking situation. Refer to
Emergency Stop Signal System on
page 4-104.
4-98
When Driving
Switches and Controls
To Next Page
Loading...
