Towing Hooks
CAUTION
l
The towing eyelet should be used in
an emergency (to get the vehicle out
of a ditch or a snow bank, for
example).
l
When using the towing eyelets,
always pull the lead or chain in a
straight direction with respect to the
eyelet. Never apply a sideways
force.
NOTE
When towing with chain or lead, wrap
the chain or lead with a soft cloth near
the bumper to prevent damage to the
bumper.
qTowing Hooks
1. Remove the towing eyelet and the
wheel brace from the luggage
compartment (page 7-3).
2. Wrap a flathead screwdriver or similar
tool with a soft cloth to prevent
damage to a painted bumper, and open
the cap located on the front or rear
bumper.
Front
Rear
CAUTION
Do not use excessive force as it may
damage the cap or scratch the painted
bumper surface.
NOTE
Remove the cap completely and store it
so as not to lose it.
3. Securely install the towing eyelet using
the wheel brace or equivalent.
Consult an Authorised Mazda Dealer.
7-30
If Trouble Arises
Emergency Towing
To Next Page
Loading...
