Mazda CX-5 - Page 175

qMaintenance Monitor (Type A
instrument cluster)
The following maintenance period
notifications can be displayed by turning
the Maintenance Monitor on.
l
Scheduled Maintenance
l
Tyre Rotation
l
Oil Change
For the setting method and indications for
the maintenance monitor, refer to the
Maintenance Monitor.
Refer to Maintenance Monitor on page
6-19.
The maintenance monitor displays the
information when the ignition is switched
ON.
NOTE
This function is inoperable while the
vehicle is being driven.
Message display
When the remaining time or the distance
approaches 0, a message is displayed each
time the ignition is switch ed ON.
NOTE
l
If any of the INFO switches (up ,
down
, or INFO button) is pressed
while a message is displayed, it will
no longer be displayed the next time
the ignition is switched ON.
l
After the vehicle is serviced and the
remaining time/distance is reset, the
message for the next maintenance
period will be displayed when the
remaining distance or time to the
next maintenance period approaches
0 (displays when engine is started).
l
If there are multiple messages, they
are displayed according to their
order.
l
If OFF is set for Messages, messages
are not displayed.
qTrip Computer and INFO Switch
The following information can be selected
by pressing the up
or down part of
the INFO switch with the ignition
switched ON.
l
Approximate distance you can travel
on the available fuel
l
Average fuel economy
l
Current fuel economy
l
Average vehicle speed
l
Vehicle speed alarm mode
í
l
Lane-Keep Assist Sy stem/Lane
departure warning system (LDWS)
display (Type A instrument cluster)
í
l
Mazda Radar Cruise Control (MRCC)
display (Type A instrument cluster)
í
When Driving
Instrument Cluster and Display
4-27
í
Some models.