l
A problem in the system may be
indicated under the following
conditions. Have your vehicle
inspected at an expert repairer, we
recommend an Authorised Mazda
Repairer.
l
The light does not turn on when the
ignition is switched ON.
l
The light continues to remain on
even though the i-stop OFF switch
has been pressed while the engine is
running.
When flashing
The light continues to flash if the system
has a malfunction. Have your vehicle
inspected at an expert repairer, we
recommend an Authorised Mazda
Repairer.
i-stop indicator light (green)
When illuminated
l
The light turns on while engine idling
is stopped and turns off when the
engine is restarted.
l
(Except European model)
The light turns on when the engine
idling stop conditions are met while the
vehicle is driven.
When flashing
l
(Manual transaxle)
The light flashes when the shift lever is
shifted to a position other than the
neutral while engine idling is stopped
to notify the driver that engine idling is
stopped. By depressing the clutch
pedal, the engine restarts automatically
and the light turns off.
l
(European model)
The light flashes when the driver's door
is opened while engine idling is
stopped to notify the driver that engine
idling is stopped. It turns off when the
driver's door is closed.
l
(Except European model)
(Automatic transaxle)
The light flashes if the vehicle is
stopped but the brake pedal is not
depressed with sufficient force.
Depress the brake pedal a little more
strongly because the pedal force may
be insufficient.
qLane-Keep Assist System
Indication (Type A)
í
While the system is on stand-by, drive the
vehicle in the centre of the vehicle lane.
When all of the following conditions are
met, the lane-keep assist system display is
indicated in the multi-information display
and the system becomes operational.
The lane-keep assist system display
(stand-by status) is indicated in the multi-
information display, and the system goes
on stand-by.
4-48
When Driving
í
Some models.
Instrument Cluster and Display
To Next Page
Loading...
