q
KEY Warning Indication/Warning
Light (Red)/Indicator Light (Green)
Type A
“Keyless System malfunction” is
displayed
This message is displayed if the advanced
keyless entry & push button start system
has a problem.
Contact an expert repairer, we recommend
an Authorised Mazda Repairer.
CAUTION
If the above message is indicated, or the
push button start indicator light (amber)
flashes, the engine may not start. If the
engine cannot be started, try starting it
using the emergency operation for
starting the engine, and have the vehicle
inspected at an expert repairer, we
recommend an Authorised Mazda
Repairer as soon as possible.
Refer to Emergency Operation for
Starting the Engine on pag e 4-10.
“Set Power to OFF” is displayed
This message is displayed when the
driver's door is opened without switching
the ignition off.
“Key not found” is displayed
This message is displayed when any of
the following operations is performed
with the key out of the operational range
or placed in areas inside the cabin where it
is difficult for the key to be detected.
l
The push button start is pressed with
the ignition switched off
l
The ignition is switched on
l
All doors are closed without switching
the ignition off
“Hold key close to start button” is
displayed
This message is displayed when any of
the following operations is performed
with the key out of the operational range
or placed in areas inside the cabin where it
is difficult for the key to be detected.
l
The push button start is pressed with
the ignition switched off
l
Brake pedal is depressed with the
ignition switched off
“Key Battery is low” is displayed
This message is displayed when the
remaining battery power of the key is low
and the ignition is switched from on to
off.
NOTE
Because the key utilizes low-intensity
radio waves, the Key Removed From
Vehicle Warning may activate if the key
is carried together wi th a metal object or
it is placed in a poor signal reception
area.
Type B
This indicator has two colours.
4-58
When Driving
Instrument Cluster and Display