q
Smart City Brake Support (SCBS)
Warning Indication (Type A)
í
The indication is displayed in the multi
information display during SCBS brake
operation or brake assist (SCBS brake
assist) operation.
qi-ELOOP Indication (Type A)
í
If the engine is started after the vehicle
has not been driven for a long period of
time, an “i-ELOOP charging” message
may be indicated in the display. Leave the
engine idling and wait until the message
disappears.
NOTE
If the vehicle is driven while the
message is displayed, a beep sound is
heard. If you turn the steering wheel
while the message is displayed, it will
feel heavier than normal, but this does
not indicate an abnormality. Stop the
vehicle in a safe location with the
engine running and do not attempt to
turn the steering wheel. The steering
operation will return to normal after the
message is no longer displayed.
q
Low Engine Coolant Temperature
Indicator Light (Blue)
The light illuminates c ontinuously when
the engine coolant temperature is low and
turns off after the engine is warm.
If the low engine coolant temperature
indicator light rema ins illuminated after
the engine has been sufficiently warmed
up, the temperature sensor could have a
malfunction. Consult an expert repairer,
we recommend an Authorised Mazda
Repairer.
qShift Position Indication
The selector position is indicated when
the ignition is switched ON.
NOTE
(Some models)
If one of the following actions is
performed, the selector position is
displayed for 5 minutes even if the
ignition switch is in a position other
than ON.
l
The ignition is switched OFF.
l
The driver's door is opened.
4-64
When Driving
í
Some models.
Instrument Cluster and Display
To Next Page
Loading...
