Mazda CX-5 - Page 215

qBlind Spot Monitoring (BSM)
OFF Indication/Indicator Light
í
Type A
The Blind Spot Monitoring (BSM) OFF
indication illuminates when the Blind
Spot Monitoring (BSM) switch is pressed
to turn off the Blind Spot Monitoring
(BSM) and Rear Cross Traffic Alert
(RCTA) systems.
If the indication remains displayed even
though the Blind Spot Monitoring (BSM)
switch has been operated, it indicates a
problem in the system. Have your vehicle
inspected at an expert repairer, we
recommend an Authorised Mazda
Repairer.
Type B
This indicator light illuminates for a few
seconds when the ignition is switched
ON.
The Blind Spot Monitoring (BSM) OFF
indicator light illuminates when the Blind
Spot Monitoring (BSM) switch is pressed
to turn off the Blind Spot Monitoring
(BSM) and Rear Cross Traffic Alert
(RCTA) systems.
A problem in the system may be indicated
under the following conditions. Have your
vehicle inspected at an expert repairer, we
recommend an Authorised Mazda
Repairer.
l
The light does not turn on when the
ignition is switched ON.
l
It remains illuminated even though the
Blind Spot Monitoring (BSM) switch
has been switched off.
l
It turns on while driving the vehicle.
NOTE
If the vehicle is driven on a road with
less traffic and few vehicles that the
radar sensors can detect, the system
may pause (The Blind Spot Monitoring
(BSM) OFF indication/indicator light in
the instrument clust er illuminates).
However, it does not indicate a
malfunction.
qLights-On Indicator Light
This indicator light illuminates when the
exterior lights and instrument panel
illumination are on.
The light continues to flash if the lighting
system has a malfunction. Consult an
expert repairer, we recommend an
Authorised Mazda Repairer.
When Driving
Instrument Cluster and Display
4-67
í
Some models.