NOTE
Under the following conditions, the adaptive LED headlights may not operate normally.
Manually switch between the high and low beams accordin g to the visibility, and the
road and traffic conditions.
l
When there are other sources of light in the area such as street lamps, illuminated
signboards, and traffic signals.
l
When there are reflective objects in the surrounding area such as reflective plates and
signs.
l
When visibility is reduced under rain, snow and foggy conditions.
l
When driving on roads with sharp curves or undulations.
l
When the headlights/rear lamps of vehicles ahead or in the opposite lane are dim or
not illuminated.
l
When there is insufficient darkness such as at dawn or dusk.
l
When the luggage compartment is loaded with heavy objects or the rear passenger
seats are occupied.
l
When visibility is reduced due to a vehicle ahead spraying water from its tyres onto
your windscreen.
qTo Operate the System
The system switches the headlights to the
high beams after the ignition is switched
ON and the headlight switch is in the
position. The adaptive LED
headlights indicator light (green) in the
instrument cluster turns on
simultaneously.
The adaptive LED headlights determine
that it is nighttime based on the brightness
of the surrounding area.
The system cancels operation when the
headlight switch is turned to a position
other than
, the headlights are
manually switched to low beams, or the
high beams are flashed on and off.
NOTE
The system can be changed so that the
adaptive LED headlights do not
operate.
Refer to Personalisation Features on
page 9-12.
When Driving
i-ACTIVSENSE
4-133
To Next Page
Loading...
