qAdjustable Speed Limiter Display
The setting status of the adjus table speed
limiter is displayed in the mul ti-
information display in the instrument
cluster.
Stand-by display
Displays when the speed limiter switch is
operated and the system is turned on.
Turns off when the system is turned off.
Setting display
Displays when the SET
/SET switch
is operated and the speed is set.
Cancel display
Displays when any of the following
operations is done and the system is
temporarily cancelled.
l
Cancel switch is operated
l
Accelerator pedal is strongly depressed
q
Adjustable Speed Limiter Warning
If the vehicle speed exceeds the set speed
by about 3 km/h (2 mph) or more, a
warning sound operates continuously and
the adjustable speed limiter display
flashes at the same time. The warning
sound operates and the display flashes
until the vehicle speed decreases to the set
speed or less.
Verify the safety of the surrounding area
and adjust the vehicle speed by applying
the brakes. Additionally, keep a safer
distance from the vehicles behind you.
CAUTION
If the set speed is set lower than the
current vehicle speed by pressing the
SET
or RESUME switch, the
warning beep is not activated for about
30 seconds even if the vehicle speed is
faster than the newly set speed by 3
km/h (2 mph). Be careful not to drive
over the set speed
4-178
When Driving
i-ACTIVSENSE
To Next Page
Loading...
