Mazda CX-5 - Page 429

2. Press a channel preset button for about
2 seconds until a beep is heard. The
preset channel number or station
frequency will be displayed. The
station is now held in the memory.
3. Repeat this operation for the other
stations and bands you want to store.
To tune one in the memory, select MW/
LW, FM1, or FM2 and then press its
channel preset button. The station
frequency or the channel numbe r will
be displayed.
Radio Data System (RDS)
NOTE
The radio data system (RDS) does not
function if it is out of the system's
service coverage area.
Alternative frequency (AF)
AF functions on FM stations. Press the
audio control dial and select the AF mode
to turn it on and “AF” will be displayed.
If the radio reception of the current station
weakens, the system switches to an
alternative station automatically.
If you wish to continue a regional
programme, press the audio control dial
and select the REG mode to turn it on.
“REG ON” is displayed. To cancel it,
press the audio control dial and select the
REG mode to turn it off. “REG OFF” is
displayed.
Traffic announcement (TA)
If the traffic announcement button (
)
is pressed, the unit switches to TA mode
and “TA” is displayed.
If a TA broadcast is received while in the
TA mode, the TA broadcast intercedes
even while using other functions (FM,
CD, USB, iPod, AUX, or BT audio), and
“Traffic Info” is displayed.
During a TA broadcast, press the traffic
announcement button (
) to end the
broadcast and return to the previ ous
mode.
Programme-type information (PTY)
Some FM stations transmit programme-
type codes. This code enables alternative
stations transmitting the same
programme-type code to be found
quickly.
Press the programme-type information
button (
, ) while in FM mode. The
programme-type code and “ PTY” will be
displayed during reception. If there is no
programme-type code, “ None” will be
displayed.
(To choose a programme type:)
1. Press the Programme-type information
button (
, ) when the programme-
type code is displayed.
2. Operate any one of the following:
l
Press the pre-programmed channel
preset button (1 to 6).
l
Press the Programme-type
information button (
, ).
(To scan for programme-type
information:)
1. Press the Programme-type information
button (
, ) when the programme-
type code is displayed.
Interior Features
Audio System
5-39