Mazda CX-5 - Page 525

qHow to Use the Bluetooth® Audio System
Switching to Bluetooth
®
audio mode
To listen to music or voice audio recorded to a Bluetooth
®
audio device, switch to the
Bluetooth
®
audio mode to operate the audio device using the audio system control panel.
Any Bluetooth
®
audio device must be paired to the vehicle's Bluetooth
®
unit before it can
be used.
Refer to Bluetooth® Preparation (Type C/Type D Audio) on page 5-109.
1. Turn on the Bluetooth
®
audio device's power.
2. Switch the ignition to ACC or ON.
3. Select the
icon on the home screen and display the Entertainment screen.
4. When
is selected, switches to the Bluetooth
®
audio mode to begin playback.
NOTE
l
If Bluetooth
®
audio is used after using Aha™ or Stitcher™ radio, the application on
the mobile device has to be closed first.
l
If the Bluetooth
®
audio device does not begin playba ck, select the icon.
l
If the mode is switched from Bluetooth
®
audio mode to another mode (radio mode),
audio playback from the Bluetooth
®
audio device stops.
Interior Features
Bluetooth®
5-135