NOTE
l
Inspect the engine oil level periodically. When inspecting the engine oil, if the engine
oil level is exceeds the “X” mark on the dipstick, replace the engine oil. We
recommend an expert repairer, we recommend an Authori sed Mazda Repairer. When
replacing the engine oil, inspect the oil level using the oil dipstick and refill so that the
engine oil level is within the range between Full to Low as shown in the figure.
X MarkFullLow
qVehicle Engine Control Unit Reset Procedure
NOTE
This procedure is intended for vehicles with SKYACTIV-D 2.2 and vehicles with
SKYACTIV-G 2.0 or SKYACTIV-G 2.5 which the engine oil flexible maintenance
setting is selected.
After replacing the engine oil, have a repair shop such as an Authorised Mazda Repairer
perform the initialization (engine oil data resetting) of the recorded value. If the value
recorded by the computer is not initialized, the wrench indicator light may not turn off or it
may turn on earlier than normal.
Maintenance and Care
Owner Maintenance
6-29
To Next Page
Loading...
