qi-ELOOP Warning Beep
í
If the vehicle is driven while “i-ELOOP
charging” is displayed, a beep sound is
heard. Make sure the message is no longer
displayed before driving.
qVehicle Speed Alarm
í
The vehicle speed alarm function is
designed to alarm the driver via a single
beep sound and a warning indication in
the instrument clust er that the previously
set vehicle speed has been exceeded.
You can change the vehicle speed setting
at which the warning is triggered (page
4-27).
qTyre Inflation Pressure Warning
Beep
í
The warning beep sound will be heard for
about 3 seconds when there is any
abnormality in tyre inflation pressures
(page 4-212).
qOutside Temperature Warning
Beep
í
Warns the driver of the possibility of icy
roads when the outside temperature is
low.
If the outside temperat ure is lower than
about 4 °C, a beep sound is heard once
and the outside temperature display
flashes for about ten seconds. (page 4-25)
q
Lane Departure Warning Sound
í
If the system determines that the vehicle
may depart from the lane while the system
is operating, it sounds a warning sound.
(Lane-keep assist system)
The warning sound is activated when the
driver takes his or her hands off the
steering wheel while the lane-keep assist
system is operating.
NOTE
l
The volume of the lane-keep assist
system/LDWS warning sound can be
changed.
Refer to Personalisation Features on
page 9-12.
l
The type of the lane-keep assist
system/LDWS warning sound can be
changed.
Refer to Personalisation Features on
page 9-12.
qBlind Spot Monitoring (BSM)
System Warning Beep
í
Driving forward
The warning beep operates when the
direction indicator lever is operated to the
side where the BSM warning light is
illuminated.
NOTE
A personalised function is available to
change the BSM warning beep sound
volume. Refer to Personalisation
Features on page 9-12.
7-50
If Trouble Arises
í
Some models.
Warning/Indicator Lights and Warning Sounds
To Next Page
Loading...
