NOTE
l
(With the advanced keyless
function European models)
The setting can be changed so that a
beep sound is heard for confirmation
when the doors and liftgate are
locked/unlocked using the key.
(With the advanced keyless
function Except European model s)
A beep sound can be heard for
confirmation when the doors and
liftgate are locked/unlocked using
the key. If you prefer, the beep sound
can be turned off.
The volume of the beep sound can
also be changed.
Refer to Personalisation Features on
page 9-12.
Use the following procedure to change
the setting.
1. Switch the ignition off and close all
of the doors and the liftgate.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
LOCK button on the key for 5
seconds or longer.
All of the doors and the liftgate lock
and the beep sound activates at the
currently set volume. (If the beep
sound is currently set to not activate,
it will not activate.) The setting
changes each time the LOCK button
on the key is pressed and the beep
sound activates at the set volume. (If
the beep sound has been set to not
activate, it will not activate.)
NOTE
4. The setting change is compl eted by
doing any one of the following:
l
Switch the ignition to ACC or
ON.
l
Close the driver's door.
l
Open the liftgate.
l
The key is not operated for 10
seconds.
l
Press any button except the
LOCK button on the key.
l
A request switch is pressed.
The operation indicator light flashes when
the buttons are pressed.
Lock button
To lock the doors and the liftgate, press
the lock button and the hazard warning
lights will flash once.
(With the advanced keyless function
Except European models)
A beep sound will be heard once.
Before Driving
Keys
3-5
To Next Page
Loading...
