Mazda CX-7 2007 - Page 100

BODY STRUCTURE [PANEL REPLACEMENT]
09-80B–76
2. Rough cut area (A).
Caution
• During rough cutting, be careful not to damage the crossmember No.4 indicated by dotted lines in
the figure.
3. Drill the remaining locations, then remove the rear floor pan.
REAR FLOOR PAN
13
10
(A)
40mm {1.57in}
60mm {2.36in}
13
10
CUT-AND JOIN
LOCATION
ROUGH CUT
LOCATION
acxuub00000140
3419-1U-06C(09-80B).fm 76 ページ ２００６年３月２４日 金曜日 午後４時４７分