Mazda CX-7 2007 - Ultra High-Tension Steel; [Construction]

BODY STRUCTURE [CONSTRUCTION]
09-80A–3
09-80A
x:Applied
-:Not applied
No. Part Name
Ultra high-
tension
steel
High-
tension
steel
Rust proof
steel
Thickness
mm {in}
1 Hood - x x 0.70 {0.028}
2 Front bumper bracket - x x 2.00 {0.079}
3 Front side frame (inner)
Front x - x 1.80 {0.071}
Rear - x x 2.30 {0.091}
4 Shroud side panel - - x 1.60 {0.063}
5 Shroud side member - - x 1.20 {0.047}
6 Apron panel (front)
RH - - x 1.00 {0.039}
LH - - x 0.65 {0.026}
7 Engine mount bracket No.3 - - x 1.40 {0.055}
8 Front suspension housing (upper) - x x 2.60 {0.102}
9 Apron panel (lower)) - - x 0.85 {0.033}
10 Apron reinforcement (lower) - x x 0.85 {0.033}
11 Apron reinforcement (upper) - x x 1.40 {0.055}
12 Cowl side reinforcement - - x 1.20 {0.047}
13 Front side frame (outer)
Front x - x 1.80 {0.071}
Center x - x 2.60 {0.102}
Rear - x x 2.30 {0.091}
14 Front frame rear - x x 2.90 {0.114}
15 Torque box - x x 1.40 {0.055}
16 Front fender panel - - x 0.85 {0.033}
17 Dash lower member - - x 1.20 {0.047}
18 Dash lower panel - - x 0.80 {0.031}
19 Cowl panel - - x 0.70 {0.028}
20 Wiper bracket - - x 1.60 {0.063}
21 Hinge pillar (inner) - x x 1.00 {0.039}
22 Hinge pillar reinforcement x - - 1.60 {0.063}
23 Side sill (inner) - x x 1.40 {0.055}
24 Side sill reinforcement x - - 1.20 {0.047}
25 Front pillar (inner) x - - 1.40 {0.055}
26 Front pillar reinforcement x - - 1.60 {0.063}
27 Center pillar (inner) x - - 1.20 {0.047}
28 Center pillar reinforcement (outer)
Upper x - - 1.60 {0.063}
Center x - - 1.80 {0.071}
Lower x - - 1.20 {0.047}
29 Roof rail (inner) x - - 1.20 {0.047}
30 Roof rail reinforcement - x - 1.60 {0.063}
31 Front header - - - 0.80 {0.031}
32 Roof reinforcement - - - 0.55 {0.022}
33 Roof reinforcement x - - 1.20 {0.047}
34 Roof reinforcement - - - 0.55 {0.022}
35 Roof reinforcement - - - 0.55 {0.022}
36 Rear header
Upper - - - 0.50 {0.020}
Lower - - - 0.75 {0.030}
37 Roof panel - - - 0.85 {0.033}
38 Rear pillar reinforcement - - - 0.70 {0.028}
39 Rear pillar (outer) - - x 0.70 {0.028}
40 Corner junction - - - 1.00 {0.039}
41 Corner plate - - x 1.00 {0.039}
42 Wheel house (inner) - - x 0.85 {0.033}
43 Rear pillar (inner) - - x 0.65 {0.026}
44 Rear suspension housing reinforcement - - - 0.90 {0.035}
3419-1U-06C(09-80A).fm 3 ページ ２００６年３月２２日 水曜日 午後６時２０分